11 Tips for Winterizing Water Heaters in RVs That Prevent Costly Repairs

Protecting your RV’s water heater during winter is crucial to prevent costly damage and ensure it’s ready for your next adventure. When temperatures drop below freezing your water heater becomes vulnerable to cracking burst pipes and other serious issues that could put a damper on your travel plans. Whether you’re a seasoned RV enthusiast or a newcomer to the world of recreational vehicles learning how to properly winterize your water heater is an essential skill that’ll save you time money and headaches in the long run.

With freezing temperatures approaching now’s the perfect time to prepare your RV’s water heater for winter storage. We’ll guide you through the essential steps and expert tips to protect your investment and maintain your water heater’s performance for years to come.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Understanding Why RV Water Heater Winterization Is Critical

Potential Damage From Freezing Temperatures

Water expands by nearly 9% when it freezes causing catastrophic damage to your RV’s water heater components. The expansion can crack the tank burst water lines split fittings and destroy valves. Even tiny amounts of trapped water can create hairline fractures that worsen over time leading to major leaks. The heating element copper pipes and pressure relief valve are particularly vulnerable to freeze damage that can render your entire water heating system unusable.

Hey hey – real quick! Don’t forget to subscribe to get our best content 🙂

Cost Implications Of Neglecting Winterization

Skipping proper winterization can result in repair costs ranging from $500 to $1500 for basic component replacement. A complete water heater replacement typically costs $1000-$2000 including installation. Additional expenses often include:

Repair Type	Average Cost
Tank Replacement	$800-1200
Burst Pipe Repair	$200-400
Valve Replacement	$150-300
Labor Costs	$75-150/hour

Beyond immediate repairs water damage from burst pipes can affect surrounding RV components causing structural issues that require extensive restoration.

Gathering Essential Tools And Materials For Winterization

Before starting the winterization process you’ll need to assemble all necessary tools and materials to ensure a smooth and effective procedure.

Basic Tools Required

• Air compressor (25-50 PSI capacity) with blowout plug adapter
• Water heater tank wrench or socket set
• Basic screwdrivers (Phillips and flathead)
• Pliers and adjustable wrench
• Water pump converter kit
• Bucket for drainage
• Safety goggles and work gloves
• Water heater bypass kit (if not already installed)
• Manufacturer’s manual for reference

• Non-toxic RV antifreeze (2-3 gallons depending on system size)
• Water heater cleaning solution
• Tank sanitizer
• White vinegar for natural cleaning option
• Water filter cartridge for post-winter reinstallation
• Plumber’s tape for sealing connections
• Drain valve caps and plugs
• Water system cleaning solution

Note: Check your RV’s specific requirements as some models may need additional specialized tools or different quantities of antifreeze based on tank capacity and plumbing configuration.

Draining The RV Water Heater System

Properly draining your RV’s water heater system is a crucial first step in the winterization process to prevent freeze damage.

Locating The Drain Valve

The drain valve is typically located on the exterior of your RV near the water heater access panel. Look for a plastic or brass valve on the bottom of the tank behind a metal or plastic cover plate. Most Suburban and Atwood water heaters have the drain positioned on the lower left side. Access might require removing a few screws from the cover panel to expose the drain valve.

Removing Drain Plug And Anode Rod

Turn off all power sources to the water heater including electric and gas. Let the tank cool completely for at least 2 hours to avoid scalding. Use your tank wrench to slowly loosen the drain plug or anode rod counterclockwise. If you have a combination anode rod/drain plug inspect it for corrosion while removing it. Keep steady pressure when unscrewing to prevent cross-threading. Once removed store the plug or rod in a safe place for reinstallation in spring.

Flushing And Cleaning The Water Heater Tank

Removing Mineral Deposits

Flush your RV’s water heater tank to remove sediment and mineral deposits that accumulate over time. Connect a water hose to the tank’s drain valve and run fresh water through until it flows clear. For stubborn deposits use a descaling solution specifically designed for RV water heaters or a mixture of white vinegar and water in a 1:1 ratio. Let the solution sit for 2-3 hours then flush thoroughly with clean water. Use a tank rinser wand to reach difficult areas and break up calcium deposits.

Inspecting For Corrosion

Check the anode rod and tank interior for signs of corrosion while the tank is empty. Look for rust spots pitting flaking metal or white calcium buildup on tank walls. Examine the pressure relief valve gaskets and connections for deterioration. Replace the anode rod if it’s more than 75% deteriorated to protect the tank from further corrosion. Test the pressure relief valve by lifting the lever and checking for proper water flow then inspect the valve seat for mineral deposits or damage.

Installing Bypass Systems For Added Protection

A bypass system diverts water flow around your RV’s water heater during winterization protecting it from freeze damage while using less antifreeze.

Types Of Water Heater Bypass Valves

Three main types of bypass valves are available for RV water heaters:

• Basic Three-Valve System: Features two valves at the hot/cold inlet lines and one between them creating a bypass loop
• Two-Valve System: Uses two valves with a built-in crossover line requiring less space but offering limited control
• Single-Valve System: Contains an all-in-one valve design that’s easiest to operate but may be more expensive to replace if it fails

The three-valve system remains the most popular choice offering complete control and simple maintenance with readily available replacement parts.

1. Locate Optimal Position: Mount bypass valves close to the water heater for easy access
2. Cut Supply Lines: Turn off water measure twice cut once using proper pipe cutters
3. Install Tee Fittings: Connect tee fittings to hot and cold lines using appropriate fittings
4. Mount Bypass Valves: Secure valves in correct orientation following flow direction arrows
5. Test System: Check for leaks and proper operation before completing winterization

Use plumber’s tape on all threaded connections and support pipes with mounting brackets to prevent stress on fittings. Leave enough clearance around valves for easy operation.

Adding RV Antifreeze To The System

After draining and bypassing your water heater it’s time to add antifreeze to protect your RV’s plumbing system during winter storage.

Calculating Required Antifreeze Amount

The amount of RV antifreeze needed depends on your RV’s plumbing system size. Small travel trailers typically require 2-3 gallons while larger motorhomes need 4-6 gallons. Check your owner’s manual for the exact recommendation based on your model. Add an extra gallon to ensure complete coverage of all pipes fixtures drains and p-traps. Always use non-toxic propylene glycol antifreeze specifically designed for RVs.

Proper Distribution Methods

Connect the water pump converter kit to your RV’s water pump then attach the antifreeze supply line into the antifreeze container. Turn on all faucets one at a time starting with the closest to the pump. Run each fixture until you see pink antifreeze flowing consistently. Don’t forget exterior shower fixtures city water inlets and toilet bowls. Pour 1 cup of antifreeze directly into each drain to protect p-traps. Double-check that antifreeze has reached all plumbing components before finishing.

Checking Electric And Gas Components

Regular inspection of your RV water heater’s electrical and gas components ensures safe operation and prevents costly repairs during winter storage.

Testing The Heating Elements

Test your electric heating element’s functionality using a multimeter set to ohms. Disconnect the power wires connect the multimeter leads to the element’s terminals. A reading between 10-30 ohms indicates a working element while no reading suggests replacement is needed. Check for any signs of corrosion rust or mineral buildup on the element’s surface. Clean connections with a wire brush ensuring proper contact.

Inspecting Gas Lines And Connections

Examine all gas lines for cracks deterioration or loose fittings using a certified gas leak detection solution. Check the gas valve for smooth operation and inspect the thermocouple for any discoloration or damage. Test the pilot light assembly ensuring it lights properly and maintains a strong blue flame. Tighten all connections with appropriate tools but avoid overtightening which can damage fittings. Replace any corroded or worn components before winterizing.

Common Mistakes To Avoid During Winterization

Avoid these critical errors to ensure your RV’s water heater stays protected throughout the winter months.

Incorrect Antifreeze Usage

Using the wrong type or amount of antifreeze can lead to serious problems. Never use automotive antifreeze in your RV’s water system – only use non-toxic RV-specific antifreeze rated for -50°F or lower. Don’t skip the bypass valve when adding antifreeze as this wastes product and money. Add antifreeze only after completely draining the system and ensure it reaches all faucets plumbing lines & p-traps. A typical RV needs 2-6 gallons depending on size.

Incomplete Draining Issues

Failing to drain the water heater system completely is a common yet dangerous oversight. Remove both drain plugs and open all low-point drains to eliminate trapped water. Use compressed air (30-50 PSI) to blow out remaining water from lines & fixtures. Check shower heads sinks toilets & outdoor shower connections for residual water. Don’t forget to drain the fresh water tank & water pump – even small amounts of trapped water can freeze & cause damage.

Maintaining Your Winterized System

Regular Check-up Schedule

Inspect your winterized RV water heater system monthly during storage. Check antifreeze levels in p-traps drain lines & toilets to ensure adequate protection remains. Monitor exterior drain plugs & bypass valves for signs of leakage or damage weekly during freezing temperatures. Create a maintenance checklist including:

• Testing pressure relief valve function
• Examining anode rod condition through access panel
• Inspecting water lines for cracks or splits
• Verifying bypass valve positions
• Checking antifreeze concentration with test strips

Emergency Response Plans

Keep essential repair supplies readily available in case of winterization system failures. Store replacement parts like drain plugs anode rods & bypass valves in an easily accessible location. Create an emergency contact list including:

• Local RV repair services with 24/7 availability
• Mobile repair technicians specializing in water heaters
• Nearby RV parts suppliers
• Towing service numbers
• Insurance company contact information

Keep detailed instructions for emergency drain procedures posted near your RV’s water heater access panel. Include steps for manually draining the system & adding antifreeze if temperatures suddenly drop below freezing.

Preparing For Spring Reactivation

Properly winterizing your RV’s water heater is essential for protecting your investment and ensuring worry-free travels when warm weather returns. Taking these preventive steps now will save you thousands in potential repair costs while extending your water heater’s lifespan.

Remember to document your winterization process and keep a maintenance checklist handy. When spring arrives you’ll need to reverse these steps to get your RV ready for another season of adventure. Store your winterization supplies together in a dedicated kit so you’re prepared for next winter.

With your water heater and plumbing system now protected from freezing temperatures you can rest easy knowing your RV will be ready to hit the road when camping season begins again. Just follow the proper de-winterization procedures and you’ll be back to enjoying hot showers in no time.